Top 10 3D Print Cooling Fan

0

Finding your suitable readers for 3d print cooling fan is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 3d print cooling fan including detail information and customer reviews. Let’s find out which is your favorite one.

996 reviews analysed

1. 4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)

4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)

Feature

2. ANVISION 2-Pack DC 24V 40mm x 10mm Brushless Cooling Fan, Dual Ball Bearing, YDM4010B24

ANVISION 2-Pack DC 24V 40mm x 10mm Brushless Cooling Fan, Dual Ball Bearing, YDM4010B24

Feature

Description

Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g

Rated Voltage: 24V DC
Operating Voltage Range: 21.6-26.4V DC
Start-up Voltage: 14.0V DC
Rated Current: 0.06A

Rated Speed: 6000PRM
Air Flow: 5.07CFM
Air Pressure: 2.45mmAq
*Noise Level: 23.20dB(A)
Life Expectancy: 50000H at 25degree test

*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.

3. HICTOP 3D Printer Turbo Fan Blower Fan 0.9M Wiring 12V DC 50mm x 15mm Cooling Fan 3D Printer Parts (2 Packs)

HICTOP 3D Printer Turbo Fan Blower Fan 0.9M Wiring 12V DC 50mm x 15mm Cooling Fan 3D Printer Parts (2 Packs)

Feature

4. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)

4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)

Feature

5. MakerFocus 4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement

MakerFocus 4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement

Feature

Description

Color:4pcs 3D Printer Fan 12V 0.08A

4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement

Description:
Size: 40 mm x 40 mm x 10 mm;
Working Voltage: DC 12V;
Working Current: 0.08A;
Air Flow: 5.75±10% CFM;
Power: 0.96w;
Cable length: 280mm;
Certification: CE,UL,CUL;

Feature:
Oil bearing 30000 hours;Double roller bearing 50000 hours.
Temperature of usage environment: -10℃ to +70℃;
Bearing is high precision, long life and low noise

Package Including:
4 * DC 12V 0.08A 40X40X10mm 3D Printing Fan

6. KeeYees 24V 3D Printer Brushless DC Cooling Fan 2 Pin Terminal 50mm x 50mm x 15mm 5015 and 40 x 40 x 10mm 4010 with Fan Protection Cover

KeeYees 24V 3D Printer Brushless DC Cooling Fan 2 Pin Terminal 50mm x 50mm x 15mm 5015 and 40 x 40 x 10mm 4010 with Fan Protection Cover

Feature

Description

Specification:
Rated Voltage : DC24V 
Operation Voltage: DC10.8-13.2 
Consuming Current : 0.10A(0.12 Max.) 
Consuming Power: 1.2W(1.44 Max.) 
Connector: 2pin-ph2.5 
Rated Speed: 6200 PRM 
Iife Expectance: 50,000 hours at 25 degree 
Insulation Level: UL Class A 
Acoustic Noise: 27db
Max. Air Flow: 6.86CFM 
Rotation Direction: Clounter-clockwise 
DC Line Length : 290mm 
Size:40x40x10mm and 50x50x15mm

Product List:
2 x Cooling Fan 50x50x15mm
2 x Cooling Fan 40x40x10mm
2 x Fan Guards

KeeYees: Best choice in various Electronic Modules & Components, DIY Parts and Tools to
support your work and design challenges from Home, School to Industrial applications!

7. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

Feature

Description

Color:12V

This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.

 

Specification:

Rated Voltage: DC 12V

Consuming Current: 0.08A

Connector: 2pin-ph2.5

Speed: 6000 + -10% RPM

Air Flow: 6.5 CFM

Static Pressure: 2.9

Noise Level: 27dBA

Note: Any questions, you can contact us and we will give you a satisfied solution!

Notice!!!

Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.

8. LABISTS 3D Printer Cooling Fan 25mmx25mmx7mm 12V 2507DC

LABISTS 3D Printer Cooling Fan 25mmx25mmx7mm 12V 2507DC

Feature

9. Antrader 4010 24V 2 Pin Brushless DC Cooling Fan 40 x 40 x 10mm for DIY 3D Printer Extruder Humidifier 6-Pack

Antrader 4010 24V 2 Pin Brushless DC Cooling Fan 40 x 40 x 10mm for DIY 3D Printer Extruder Humidifier 6-Pack

Feature

Description

Color:40x40x10mm (24V, 6-pack)

The Best Product to Save Your Time and Money!

Specifications:
Model: 4010
Rated Voltage: DC24V
Consuming Current : 0.12A(0.15 Max.)
Consuming Power: 1.2W(1.44 Max.)
Connector: 2pin-ph2.5 Rated
Speed: 6800 PRM
Iife Expectance: 67,000 hours at 25 degree
Insulation Level: UL Class A
Certificate: FCC,CE
Acoustic Noise: 18db***
DC Line Length : 120mm Max.
Air Flow: 68.6CFM
Size:40 x 40 x 10mm/ 1.57″ x 1.57″ x 0.39″

Package Content:
6pcs x DC Brushless Cooling Fan

Notes:
1.The colors may have difference as the different display, please understand.
2.Please allow 1-2mm error due to manual measurement, please make sure you do not mind before you bid.

QUALITY GUARANTEE: If there is any quality problem, please feel free to contact us. Refund or Replacement for any quality problem.

10. Antrader 12V Dual Ball Bearing Brushless DC Radial Blower Cooling Fan for DIY 3D Printer Extruder Humidifier 3-Pack

Antrader 12V Dual Ball Bearing Brushless DC Radial Blower Cooling Fan for DIY 3D Printer Extruder Humidifier 3-Pack

Feature

Description

Color:50x50x15mm (3-pack)

The Best Product to Save Your Time and Money!

Backup Stock:
https://www.amazon.com/dp/B07ML33H73

Specifications:
Model: 5015
Name: 12V DC BRUSHLESS FAN
Rated Voltage : DC12V
Operation Voltage: DC 5-13.2V
Consuming Current : 0.23A(0.35A Max.)
Consuming Power: 2.7W(4.2 Max.)
Connector: 2pin-ph2.5 Rated
Rated Speed: 6000 R.P.M.
Max. Air Flow: 3.87CFM
Iife Expectance: 50,000 hours at 40 degree
Insulation Level: UL Class A
Certificate: UL,CE,TUV
Acoustic Noise: 16.0dB***
DC Line Length : 120mm
Rotation Direction: Clounter-clockwise
Size: 50x50x15mm/ 2″ x 2″ x 0.55″
Weight: 78g

Package Content:
3pcs x DC Brushless Cooling Fan

Note:
1.The colors may have difference as the different display, please understand.
2.Please allow 1-2mm error due to manual measurement, please make sure you do not mind before you bid.

QUALITY GUARANTEE: If there is any quality problem, please feel free to contact us. Refund or Replacement for any quality problem.

Conclusion

By our suggestions above, we hope that you can found 3D Print Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general