The Best Cooling Heat Sink 62

0

Nowadays, there are so many products of cooling heat sink 62 in the market and you are wondering to choose a best one.You have searched for cooling heat sink 62 in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings cooling heat sink 62 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

501 reviews analysed

1. Enokay Raspberry Pi 4 Model B Heat Sink Single Cooling Fan RAM Heatsink Set

Enokay Raspberry Pi 4 Model B Heat Sink Single Cooling Fan RAM Heatsink Set

Feature

Description

The Raspberry Pi 4B Single Cooling Fan Was Included the Thermal Conductive Adhesive.

1.Fan Designed for Raspberry Pi 4B
2.Not included Raspberry Pi 4 Model B Motherboard
3.The Raspberry Pi 4B Single Cooling Fan Was Included the Thermal Conductive Adhesive.

Packing included:
1.Raspberry pi 4B Single Cooling Fan
2.Black Aluminum Heatsink Set for Raspberry Pi 4B

2. StarTech.com 1U 60x10mm Socket 7/370 CPU Cooler Fan -Low Profile CPU Cooler w/ Copper Heatsink & TX3 (FAN3701U),Black

StarTech.com 1U 60x10mm Socket 7/370 CPU Cooler Fan -Low Profile CPU Cooler w/ Copper Heatsink & TX3 (FAN3701U),Black

Feature

Description

Size:TX3 | Style:Socket 7/370 – Copper

This 60x10mm Socket 7/370 CPU Cooler helps keep your 1U servers running smoothly, by providing a reliable, cost-effective server cooling solution. The server CPU cooler features a copper base and socket-type CPU fan, ensuring rapid heat dissipation in the reduced space of a 1U server environment. The CPU cooler is powered through a simple TX3 connection to the server power supply, and is suitable for all Intel Celeron/PIII processors and AMD Athlon/Duron processors up to 1GHz.

3. tatoko Aluminum Chipset Heatsink, 100mm (L) x40mm(W) x20mm (H) Heat Sink Cooling Fin for High Power Amplifier Transistor Semiconductor 2PCS

tatoko Aluminum Chipset Heatsink, 100mm (L) x40mm(W) x20mm (H) Heat Sink Cooling Fin for High Power Amplifier Transistor Semiconductor 2PCS

Feature

Description

1.Made of high quality Aluminum, good thermal conductivity

  • 2.Reduce the risk of hardware failure due to overheating
  • 3.Maximize surface area Designed in contact with the cooling air. The 11pcs fins increase the area of the board and thus provide for greater heat transfer
  • 4.Widely used for computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc.
  • 5.Please make sure that the size of the heat sink fits that of your component
  • 4. Aluminum Heat Radiator Heatsink Cooling Fan 150x85x12mm Blue Tone

    Aluminum Heat Radiator Heatsink Cooling Fan 150x85x12mm Blue Tone

    Feature

    Description

    * Materials: Aluminum

    * Color: blue

    * Aluminum Heatsink Size: 5.9 x 3.34 x 0.51inch / 150 x 85 x 12mm (L*W*H)

    * Used for: Various mini DC convertercircuit board, LED, Power IC, Transistor etc.

    * A heat sink is a passive heat exchangerthat transfers the heat generated by an electronic or a mechanical device,thereby allowing regulation of the device’s temperature at optimal levels.

    * Heat sinks are used with high-powersemiconductor devices such as power transistors and optoelectronics such aslight emitting diodes (LEDs), where the heat dissipation ability of thecomponent itself is insufficient to moderate its temperature.

    * Improve the environment (temperaturearound the device, as well as the flow rate of the air)

     

    * Note:

    1. Please check the specification table andmake sure that the size of the heatsink fits that of your component. Thank You!

    2. Please allow 1-3mm error due to manualmeasurement. Thanks for your understanding.

    Weight: 5.57 oz / 158 gr per piece

    5. BQLZR Huge TEC1-12730 253W Thermoelectric Peltier Cooler Cooling 62mm x 62mm x 4.8mm

    BQLZR Huge TEC1-12730 253W Thermoelectric Peltier Cooler Cooling 62mm x 62mm x 4.8mm

    Feature

    Description

    100% Brand new , never used
    Item’s color might be different from the picture because of the aberration.
    Feature:
    Solid state, vibration free, noise-free.
    Simple to install and operate.
    Each device is fully inspected and tested.
    Fitted with 2.85 inch insulated leads .
    Perimeter sealer for moisture protection.
    This device must be used in conjunction with a heat sink to avoid burned.
    Get cooling in minutes by simply reversing the polarity, used for numerous applications such as cooling your CPU, video card, NANO Reef, laser diode, CCD camera, picnic cooler, beverage cooler , alternate power sources, or even for your own custom car drink warmer/cooler.
    Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
    MODEL: TEC1-12730(TE is the abbreviation of Thermo-Electric)
    Maxiumu power consumption :456 Watts
    Output cooling power: 253W
    Operates in 12 volts DC and >30 amps
    Maximum temperature difference: △Tmax (Qc=0) Above 65°C.
    Operating current: Connect with sufficient power supply at 12V 30A
    Size: 62mm x 62mm x 4.8mm
    Weight:62g

    Note: Make sure the cooler with enough cooling, the temperature of the heat surface can not exceed 50 degrees.

    Package include:
    1 x TEC1-12730 Thermoelectric Peltier Cooler

    6. Aluminum Heat Sink Heatsink Module Cooler Fin Heat Radiator Board Cooling for Amplifier Transistor Semiconductor Devices Blue Tone 150mm (L) x 74mm (W) x10mm (H)

    Aluminum Heat Sink Heatsink Module Cooler Fin Heat Radiator Board Cooling for Amplifier Transistor Semiconductor Devices Blue Tone 150mm (L) x 74mm (W) x10mm (H)

    Feature

    Description

    * Materials: Aluminum

    * Color: blue

    * Aluminum Heatsink Size: 5.9 x 2.91 x 0.39 inch / 150 x 74 x 10mm (L*W*H)

    * Used for: Various mini DC converter circuit board, LED, Power IC, Transistor etc.

    * A heat sink is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device, thereby allowing regulation of the device’s temperature at optimal levels.

    * Heat sinks are used with high-power semiconductor devices such as power transistors and optoelectronics such as light emitting diodes (LEDs), where the heat dissipation ability of the component itself is insufficient to moderate its temperature.

    * Improve the environment (temperature around the device, as well as the flow rate of the air)

    * Note:

    1. Please check the specification table and make sure that the size of the heatsink fits that of your component. Thank You!

    2. Please allow 1-3mm error due to manual measurement. Thanks for your understanding. 

    Weight: 4.2 oz / 120 gr per piece

    7. Nxtop 12 Pcs Aluminium 40 x 40 x 11mm Square Heatsink Cooling Cooler Fin Black

    Nxtop 12 Pcs Aluminium 40 x 40 x 11mm Square Heatsink Cooling Cooler Fin Black

    Feature

    Description

    40mmx40mx11mm Aluminum Square Shape Heat Diffuse Cooling Fin Heatsink. Use heatsink adhesive glue to install heatsink . Please check the specification table and make sure that the size of the heatsink fits that of your component.

    8. Senmod 2pcs Aluminium Heatsink Cooling Module, 90x90x15mm Heat Sink Cooler Fin for High Power LED Amplifier Transistor

    Senmod 2pcs Aluminium Heatsink Cooling Module, 90x90x15mm Heat Sink Cooler Fin for High Power LED Amplifier Transistor

    Feature

    Description

    Aluminum heatsink cooling fin, generally used in heat treatment and the cooling IC and electronic component.
    The fins increase the area of the board and thus provide for greater heat transfer.

    Specifications:
    90mmx90mmx15mm Aluminum Heat Diffuse Cooling Fin Heatsink. Use heatsink adhesive glue to install heatsink. ( Glue is not included)
    Material: Aluminum; Color: Sliver Tone
    It can cool down the board and make your electronic equipment operate safely.
    Reduce the risk of hardware failure because of overheating.
    Please make sure that the size of the heat sink fits that of your component when you buy.

    Package Included:
    2pcs Aluminum Heat Sink

    9. Wingostore Heat Sink Cooling Module Aluminum Heatsink Cooler Fin (7.2" x 1.7" x 2")

    Wingostore Heat Sink Cooling Module Aluminum Heatsink Cooler Fin (7.2" x 1.7" x 2")

    Feature

    Description

    Size:7.2″ x 1.7″ x 2″

    Size:7.2″ x 1.7″ x 2″
    Weigh:11.4 Ounce

    10. JIUWU Heatsink Cooling Module Aluminum Heat Radiator Cooling Fin for High Power LED Amplifier Transistor Silver 2 Pack

    JIUWU Heatsink Cooling Module Aluminum Heat Radiator Cooling Fin for High Power LED Amplifier Transistor Silver 2 Pack

    Feature

    Description

    * Materials: Aluminum
    * Color: Silver
    * Aluminum Heatsink Size:100mm x 50.5mm x 30mm (3.94 x 2 x 1.18 inch) (L*W*H)
    * Used for: Various mini DC converter circuit board, LED, Power IC, Transistor etc.
    *A heat sink is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device, thereby allowing regulation of the device’s temperature at optimal levels.
    *Heat sinks are used with high-power semiconductor devices such as power transistors and optoelectronics such as light emitting diodes (LEDs), where the heat dissipation ability of the component itself is insufficient to moderate its temperature.
    * Small heatsink will not occupy so much room.

    * Note:
    1. Please check the specification table and make sure that the size of the heatsink fits that of your component. Thank You!
    2. Please allow 1-3mm error due to manual measurement. Thanks for your understanding. *

    * Package include:
    2pcs Aluminum Heatsink

    Conclusion

    By our suggestions above, we hope that you can found Cooling Heat Sink 62 for you.Please don’t forget to share your experience by comment in this post. Thank you!

    Home Previews
    Logo
    Enable registration in settings - general